05-18-2022 Colton Repeaters Bands: 6m,  2m,  70cm The Colton site provides coverage of the east side metropolitan area on three bands. The site is a high elevation near Sandy. The site covers Sandy, Estacada, Boring, and parts of the US 26 highway corridor east to Rhododendron. The site has emergency power. 2m     -   145.43 MHz    -  0.600 offset CTCSS tone 107.2Hz  tone on the output is 107.2 Hz       callsign  KJ7IY/R 70cm     -    442.875 MHz    + 5 MHz offset CTCSS tone  107.2Hz     callsign  KJ7IY/R 33cm     -    927.175 MHz    -  25 MHz offset CTCSS tone  107.2Hz     callsign  KJ7IY/R 6m     -      53.35 MHz     - 1.7 MHz offset CTCSS tone  107.2Hz     callsign  KJ7IY/R These repeaters can access the WORC autopatch as well as the WORC EchoLink Node# 615620 and IRLP Node # 3429. This repeater is linked to the rest of the Western Oregon Radio Club System. The configuration of the linked system can be changed by users utilizing  DTMF control codes. The 70cm is normally connected to the WORC local trunk to provide wide coverage on the UHF linked system. These repeaters may be connected to the Evergreen Intertie System by users utilizing  DTMF control codes.